Radiators that are cold at the bottom, a noisy boiler or a house that takes ages to warm up can all point to sludge in your heating system. A power flush clears it out. This guide explains what a power flush costs with us, what affects the price and how to tell if you need one.

What a power flush costs with West London Plumbing

Our power flushing starts from £750 plus VAT for weekday daytime work. The final price depends on the size and condition of your system, and we confirm it before any work starts. See all our prices on our rates page.

What affects the price

  • The number of radiators. Each radiator is flushed in turn, so larger homes take longer.
  • The condition of the system. Heavy sludge takes more time and cleaning chemicals to clear.
  • Extra work. Fitting a magnetic filter, replacing stuck valves or swapping a badly blocked radiator adds to the cost.
  • Access. Hard-to-reach boilers or pipework can add time.

Signs your heating needs a power flush

  • Radiators cold at the bottom but warm at the top. This is the classic sign of sludge settling in the radiator. If they are cold at the top instead, the cause is usually air. Try bleeding the radiator first.
  • Cold spots or radiators that never fully heat up. See our guide to a radiator not heating up for other causes.
  • A noisy boiler. Banging or rumbling can be kettling caused by sludge or scale. Read more about a boiler making a banging noise.
  • Dark, dirty water when you bleed a radiator.
  • A slow warm-up and higher heating bills than you would expect.
  • Repeated pump or boiler faults caused by debris in the system.

What happens during a power flush

  1. The engineer connects a powerful pump to your heating system.
  2. Water and cleaning chemicals are pushed through the system at high flow to loosen sludge, rust and scale.
  3. Each radiator is flushed in turn until the water runs clear.
  4. The system is refilled with clean water and a corrosion inhibitor to protect it.
  5. Many homes also have a magnetic filter fitted to catch debris in future.

For an average home, a power flush usually takes the best part of a day. You will not have heating or hot water while the work is done.

Power flushing before a new boiler

If you are replacing your boiler, the heating system should be cleaned first so sludge from the old system does not damage the new boiler. Manufacturers usually expect this for their warranty. See our guide to new boiler costs in London.

Frequently asked questions

How much does a power flush cost in London?

With West London Plumbing, power flushing starts from £750 plus VAT. We confirm the price for your system before starting.

How long does a power flush take?

Usually the best part of a day for an average home. Larger or heavily sludged systems can take longer.

Is a power flush worth it?

If sludge is causing cold radiators, noise or faults, a power flush restores heat output and protects the boiler. An engineer will check first that a flush is the right fix.

Book a power flush

Our Gas Safe registered engineers carry out power flushing in London and across West London. Call 020 3561 4415 or contact us to arrange a visit.

FREE Online Quote FREE Boiler Quote

Call us on 020 3561 4415 to speak to our experts

Finance Available

Up to 10 months finance for a new boiler installation.

Find Out More